Kobe CHX3830SQB-WM-2 Handbuch

KOBE Range Hoods Brillia Series Model No. Under Cabinet: Wall Mount: CHX3830SQB-2 (30”) CHX3836SQB-2 (36”) CHX3830SQB-WM-2 (30”) CHX3836SQB-WM-2

7 4. For Rear 3-1/4” x 10” vent installation only: - Remove attached 6” exhaust and discard. (Figure 3) Keep 13 screws to install vent covers. - Re

8 Wiring to Power Supply CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at t

9 WALL MOUNT INSTALLATION ***This installation required to have Duct Cover Model No. CH1120DC-1 Preparation before Installation NOTE: TO AVOID D

10 - Align Top Vent Cover {E} and 3-1/4” x 10” Exhaust {D}. (Figure 11) Skip to Step 5 to attach Hood Mounting Bracket {M} and

11 Wiring to Power Supply CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the mai

12 Install Accessories 15. Place baffle filters & spacers underneath the hood. (Figure 18) Final Installation 16. Turn power ON in con

13 OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust s

14 MAINTENANCE For optimal performance, clean the range hood surface and baffles regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE C

15 SPECIFICATIONS MODEL / SIZE For Under Cabinet Application For Wall Mount Application CHX3830SQB-2 (30”) CHX383

16 MEASUREMENTS & DIAGRAMS *** All inch measurements are converted from millimeters. Inch measurements are estimated. *** All measurements i

IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping da

17 ***Hood-Mounting Bracket ***Duct Cover-Mounting Bracket ***Duct Cover Support

18 PART LIST MODEL NO.: CHX3830SQB-2 and CHX3830SQB-WM-2 (30”) CHX3836SQB-2 and CHX3836SQB-WM-2 (36”) NO. DESCRIPTION MODEL /SIZE PART NO. 1 6”

19 MODEL NO.: CHX3830SQB-2 and CHX3830SQB-WM-2 (30”) CHX3836SQB-2 and CHX3836SQB-WM-2 (36”)

20 CIRCUIT DIAGRAM MODEL NO.: CHX3830SQB-2 and CHX3830SQB-WM-2 (30”) CHX3836SQB-2 and CHX3836SQB-WM-2 (36”)

21 TROUBLE SHOOTING Issue Possible Cause Solution After Installation, both motors and lights are not working. The power is not on. Make sure the c

22 WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer.

23 6. Product is purchased from an unauthorized KOBE dealer. 7. Product is damaged due to negligence, misuse, abuse, accident. If we determine tha

24 WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose.

KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA

[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...

1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the

3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) Range Hood Box Duct Cover Box (Included in Wall Mount Hood Only) CH1120DC

4 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TA

5 SAFETY WARNING HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF REMOVING ANY PARTS FOR INSTALLING, CLEANING O

6 UNDER CABINET INSTALLATION Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OP